Solution of organic tin salt.
Additive to be used in addition to enamels and clear coats to accelerate the crosslinking reaction. Recommended for solvent-based two-component acrylic (700 Series) or polyacrylic (200 Series)finishes.
Comp. A : 200 or 700 series Enamel 1000 ml 1000 gr Accelerator additive: Z.270 5 - 20 ml 5 - 20 gr Mix carefully (possibly with a stirrer) making sure the additive is evenly mixed. For subsequent preparation of enamels, and their application, follow the directions recommended in the relevant product data sheets. NOTE: Additions beyond those recommended will not lead to improved properties, but may lead to the formation of defects on the film. The addition of Z.270 shortens the Pot-Life time. Do not use on DBTL (tin) free products. Not recommended when cabin temperature is higher than 30 °C. Not recommended in houses of high relative humidity.
The storage room must be dry and with a temperature between +10 °C and +35 °C.
Strictly follow the instructions on the labeling and in the safety data sheet. Rev.: 10/22 The data and information contained in this sheet are the result of our experience and accurate laboratory test. However, since the painting process represents a set of operations that are beyond our control, they do not therefore guarantee, in any way, the final performance of the cycle.
The data and information contained in this sheet are the result of our experience and accurate tests and laboratory tests.
However, since the painting process is a set of operations that are beyond our control, they therefore do not constitute, in any way any form of guarantee on the final performance of the cycle itself.
CZ.105
EPODUR STANDARD
CZ.110
Epodur Fast - Epoxy hardener
CZ.155
Epodur Fast for primers - Epoxy hardener
CZW140
Epodur Standard water-based
CZW150
Epodur Fast water-based
CZ.250
Polydur Standard for Interiors
CZ.265
Polydur Standard Non-Yellowing
CZ.269
Polydur Slow Non-Yellowing
CZ.280
Polydur Fast Non-Yellowing
CZ.700
ACRYDUR HS
CZ.711
ACRYDUR HS
CZ.720
ACRYDUR HS
CZ.750
ACRYDUS UHS
CZ.760
ACRYDUR UHS
CZ.770
ACRYDUR UHS
CZ.777
Acrydur universal for acrylics
CZW707
Acrydur WB - Standard acrylic hardener
CZW720
Acrydur WB - Fast acrylic hardener
20021
Hardener
20102
Hardener
20VT000
Induritore
CZ.678
Hardener for finishes
CZ.STK
Hardener for STK filler pastes
HD431003
Hardener
00680
Standard oven thinner
421
Thinner for soft touch
665
Fast oven thinner
D.040
Blending Thinner
D.150
Standard epoxy thinner
D.160
Fast epoxy thinner
D.209
Slow polyurethane thinner
D.219
Standard polyurethane thinner
D.329
Medium thinner for chrome 2K
D.434
Standard synthetic thinner (for quick air dry enamels)
D.525
Nitro-cellulose thinner
D.535
Anti-fog nitro-cellulose thinner
D.636
White spirit
D.721
Thinner for base coat
D.727
SLOW
D.737
STANDARD
D.747
FAST
D.850
Standard oven thinner
D.855
Fast oven thinner
D.880
Slow oven thinner
D.921
Thinner for paints 2K
D.945
Thinner for enamels 2K
D.994
Catalyzing thinner for Wash Primer
DW030
Water-based Silicone remover
20540
ELASTICIZING
Administrative headquarters and Eyewear
Cosmetic Packaging Division
Via dell'industria, 21
20882 Bellusco (MB) - Italy
+ 39 039 684 08 50 / 53
Industry / Car Refinish Division
Via 1° maggio, 22 - Località Cagnano
36026 Pojana Maggiore (VI) - Italy
+ 39 044 476 44 15
VERNICI CALDART SRL © 2022 | P.IVA IT00759630965 | Privacy Policy | Cookies Policy | Ethical Code | Whistleblowing | Financing | SOFTWEB
