711.90900 - ACRILGRIP BIANCO LUCIDO

FIELD OF APPLICATION:

High quality finish; Especially suitable in machine tools, operating, agricultural, furniture, furniture components and plastics. Characterized by high coverage and rapid drying. It can be used directly on the substrate (iron, aluminum, galvanized sheet), as it has excellent general adhesion. 711.90900 has a controlled colorimetric yield so it can be used as a colorable white base coat up to a maximum of 5% P. paste for making pastel shades.

PREPARATION OF THE SUBSTRATE:

Iron surfaces: SA2 sandblasting, or thorough mechanical cleaning followed by degreasing with solvents, after applying a coat of 190 or 193 series epoxy primer. For steel substrates for indoor use, it can also be applied directly without primer. Galvanized iron: Treatment with appropriate passivants or degreasing with solvents followed by light scoth-brite scrubbing. Aluminum: Degreasing with solvents followed by thorough padding or sanding. Zamak: Tumbling followed by degreasing with solvents. Thermosetting resins: Degreasing with solvents. ABS: Degreasing with suitable solvents. PP: Flaming (1) Normally it is not necessary to apply primer; however given the wide variety of PP and its mixtures on the market, it is recommended to do some preliminary testing before moving on to large scale productions.

PREPARATION OF THE PRODUCT:

Comp. A: 711.90900 100 parts Comp. B: CZ.265 or CZ.777 25 parts Diluent: D.737 20 - 30 parts (*) (*) Mix thoroughly until the color and consistency are uniform. Dilute with our thinner D.737 (approx. 20% - 30% by weight on A) to a viscosity of 18-20" Ford 4 at 20 °C.

PRODUCT SPECIFICATIONS:

TYPE OF PRODUCT

Two-component;

APPEARANCE OF THE FILM

Glossy

COLORS

White

SPECIFIC WEIGHT Comp. (A)

1,30 Kg/l (± 0,05)

SUPPLY VISCOSITY

12 " +-2 DIN 8 at 25 °C

DRY RESIDUE

67% (± 2)

DRYING

Dry dust-free - Print-free: 4-5 hours. 10’ at 20 - 25 °C   Print-free 4 hours   Forced Drying 40’ - 50’ at 70 °C

RECOMMENDED LAYERS

A cross coat

RECOMMENDED THICKNESS

40 - 50 micron

POT-LIFE AT 20 °C

4 hours. The pot-life decreases at higher temperatures

THEORETICAL YIELD

9,5 m2/Lt or 7,8 m2/Kg at 50 micron dry

RECOATING:

Within 8 hours. Light sanding of the film is recommended after complete curing.

SAFETY REGULATIONS:

Strictly follow the instructions on the labeling and in the safety data sheet.

STORAGE CONDITIONS:

The storage room must be dry and with a temperature between +10 °C and +35 °C. Rev.: 03/22 The data and information contained in this sheet are the result of our experience and accurate laboratory tests. However, since the painting process represents a set of operations that are beyond our control, they do not therefore guarantee, in any way, the final performance of the cycle.

The data and information contained in this sheet are the result of our experience and accurate tests and laboratory tests.
However, since the painting process is a set of operations that are beyond our control, they therefore do not constitute, in any way any form of guarantee on the final performance of the cycle itself.