20023 - PRIMER ACRILICO 2K

PREPARATION OF THE SUBSTRATE:

Plastic materials: Cleaning / Degreasing

PREPARATION OF THE PRODUCT:

Comp. A: 20023 100 parts by volume Comp. B: 20102 15 parts by weight or volume Alternatively (*): CZ.265 20 parts by weight or volume Diluent: 274 70 – 80 parts by weight or volume In special cases, to eliminate distension defects, peel or bubbles, 5-10% of 10304R retardant should be added. (*) CZ.265 is recommended for painting polycarbonate.

PRODUCT SPECIFICATIONS:

TYPE OF PRODUCT

Two-component;

APPEARANCE OF THE FILM

Glossy

COLORS

Clear

SPECIFIC WEIGHT

Component A: 0,98 Kg/l (± 0,02)

DRY RESIDUE (A+ B)

64% (±2)

DRYING

Dry dust-free - Print-free: 4-5 hours. 30 - 40' at 20 °C. Complete curing at 20 °C - Print-free: 4-5 hours. 26 - 36 hours.   Forced Drying 30’ - 60’ at 50 - 60 °C.

RECOMMENDED LAYERS

A cross coat.

POT- LIFE at 20 °C

4 hours. The pot-life decreases at higher temperature.

RECOATING:

After 15' at room temperature or 30' at 50-60 °C.

SAFETY REGULATIONS:

Strictly follow the instructions on the labeling and in the safety data sheet.

STORAGE CONDITIONS:

The storage room must be dry and with a temperature between +10 °C and +35 °C. Rev.: 03/22 The data and information contained in this sheet are the result of our experience and accurate laboratory tests. However, since the painting process represents a set of operations that are beyond our control, they do not therefore guarantee, in any way, the final performance of the cycle.

The data and information contained in this sheet are the result of our experience and accurate tests and laboratory tests.
However, since the painting process is a set of operations that are beyond our control, they therefore do not constitute, in any way any form of guarantee on the final performance of the cycle itself.