7H1.F0210 - ELITE UHS FIAT.210- ACRILICO LUCIDO

NATURE AND PRODUCT FEATURES:

Ultra high solid glossy acrylic enamels based on acrylic-polyester resins and isocyanic adduct to be mixed at the time of use.

FIELD OF APPLICATION:

Car bodywork (the ready-to-use product falls within the limits of Legislative Decree No. 161 of 2006) and industrial field; it can also be used when finishes with high aesthetic appearance or significant external resistance features are required.

PREPARATION OF THE SUBSTRATE:

The product requires the first application of a base coat of epoxy 193 or acrylic 794.

PREPARATION OF THE PRODUCT:

Thoroughly mix component A until the color and consistency are uniform. Then mix with component B in the ratio indicated below. Comp. A: 7H1. 100 parts by weight/volume Comp. B: CZ.711 (Standard) 50 parts by weight/volume Alternatively: CZ.720 (Fast) 50 parts by weight/volume CZ.700 (Slow) 50 parts by weight/volume After catalysis, the product is ready to use. If necessary, thin the perfectly stirred mixture with 5% of our acrylic thinner D.747 Fast, D.737 Standard or D.727 Slow. In order to obtain maximum resistance to light and bad weather, we recommend adding 2% of Z.288 Anti UV additive.

PRODUCT SPECIFICATIONS:

TYPE OF PRODUCT

Two-component;

APPEARANCE OF THE FILM

Glossy

COLORS

Miscellaneous (See ready-made dye pack)

SPECIFIC WEIGHT

1,015 Kg/l (± 0,05)

SUPPLY VISCOSITY

16" (± 3") DIN 8 at 20 °C

DRY RESIDUE (Comp. A)

65% (± 3%) V.O.C. 2004/42/CE-IIB (d)(420)420

DRYING

Dry dust-free - Print-free: 4-5 hours. 30’ – 40’   Print-free 7h - 8h   Drying 24 – 36 hours at 20 °C   Forced Drying 60’ at 60 - 70 °C

RECOMMENDED LAYERS

A cross coat

RECOMMENDED THICKNESS

40 – 50 µm

THEORETICAL YIELD (1)

10 m2/Lt or 9,1 m2/Kg at 50 µm dry

POT-LIFE AT 20 °C

3 hours. The pot-life decreases at higher temperatures (1) In 70/30 ratio with P.900.

RECOATING:

After 12 hours minimum. When the film has completely hardened, the surface to be painted must be lightly sanded.

SAFETY REGULATIONS:

Strictly follow the instructions on the labeling and in the safety data sheet.

STORAGE CONDITIONS:

The storage room must be dry and with a temperature between +10 °C and +35 °C. Rev.: 08/22 The data and information contained in this sheet are the result of our experience and accurate laboratory tests. However, since the painting process represents a set of operations that are beyond our control, they do not therefore guarantee, in any way, the final performance of the cycle.

The data and information contained in this sheet are the result of our experience and accurate tests and laboratory tests.
However, since the painting process is a set of operations that are beyond our control, they therefore do not constitute, in any way any form of guarantee on the final performance of the cycle itself.