KW431 - MANOUNICA MONOCOMP. ALL''ACQUA

FIELD OF APPLICATION:

Single coat product for general use, metal carpentry, agricultural machinery, metal furniture.

PREPARATION OF THE SUBSTRATE:

Iron surfaces: Careful mechanical sanding followed by degreasing with aqueous solutions or organic solvents. Aluminum: The product has good adhesion only on chromed and phosphochromed aluminum. For substrates or products to be exposed outdoors, a coat of 494W series or 193W series primer is recommended.

PREPARATION OF THE PRODUCT:

Mix thoroughly until the color and consistency are uniform. Dilute, depending on the system and application conditions, with water to desired viscosity.

PRODUCT SPECIFICATIONS:

TYPE OF PRODUCT

Single-component.

APPEARANCE OF THE FILM

Semigloss 80 GLOSS

COLORS

By choice

SPECIFIC WEIGHT

0,97 Kg/l (± 0,05)

SUPPLY VISCOSITY

24” FORD 8 at 25 °C

DRY RESIDUE

37% (± 2%)

DRYING

Dry dust-free - Print-free: 4-5 hours. 20’ – 30’ at 20 °C   - Print-free 5 - 6 hours at 20 °C   - Forced Drying 30’ - 40’ at 60 °C - 70 °C

RECOMMENDED LAYERS

One/two coats

RECOMMENDED THICKNESS

40 - 60 µm

SAFETY REGULATIONS:

Strictly follow the instructions on the labeling and in the safety data sheet.

STORAGE CONDITIONS:

The storage room should be dry, out of sunlight and with a temperature between +10 °C and +35 °C. Rev.: 09/22 The data and information contained in this sheet are the result of our experience and accurate laboratory tests. However, since the painting process represents a set of operations that are beyond our control, they do not therefore guarantee, in any way, the final performance of the cycle.

The data and information contained in this sheet are the result of our experience and accurate tests and laboratory tests.
However, since the painting process is a set of operations that are beyond our control, they therefore do not constitute, in any way any form of guarantee on the final performance of the cycle itself.