02S0838L - VERNICE AD EFFETTO GHIACCIO LIQ.

PRODUCT FEATURES:

02S0838L is a decorating paint for glass substrates, characterized by excellent adhesion and aesthetically pleasing appearance: It also adheres directly to plastic (ABS) and metal substrates such as steel and polished aluminum (after passivation), brass and galvanized substrates.

FIELD OF APPLICATION:

Objects, cosmetics, furniture, handicrafts.

PREPARATION OF THE PRODUCT:

Before painting, clean the substrate thoroughly, possibly by glass flaming (an operation always recommended to improve adhesion). Comp. A: 02S0838L 100 Parts Comp. B: 10555P 25 Parts Thinner 10309P/10200D 100 Parts Retardant To increase crystal size, add 10304R retardant (max. 15%). It is advisable to conduct preliminary tests to determine the right amount of retardant to use. Pigmentation Paint 02S0838L can be colored with our 50100M series coloring concentrates 50100M (max.10%). Adhesion To increase adhesion, add Z.287 additive to the paint at 1 – 2% rate.

PRODUCT SPECIFICATIONS:

TYPE OF PRODUCT:

Two-component;

APPEARANCE OF THE FILM:

Matte effect;

COLORS:

Clear.

SPECIFIC WEIGHT:

0,90 Kg/l (± 0,10).

CURING:

Drying: 30' at 20 °C or until full onset of effect   Baking of glass and metal substrates: 20’- 30’ at 110 °C – 130 °C Baking of ABS substrates: 20’- 30’ at 70 °C – 80 °C;

RECOMMENDED LAYERS:

1 - 2 coats;

POT-LIFE:

8 hours at 20 °C;

SAFETY REGULATIONS:

Strictly follow the instructions on the labeling and in the safety data sheet.

STORAGE CONDITIONS:

The storage room must be dry and with a temperature between +10 °C and +35 °C. Rev.: 06/22 The data and information contained in this sheet are the result of our experience and accurate laboratory tests. However, since the painting process represents a set of operations that are beyond our control, they do not therefore guarantee, in any way, the final performance of the cycle.

The data and information contained in this sheet are the result of our experience and accurate tests and laboratory tests.
However, since the painting process is a set of operations that are beyond our control, they therefore do not constitute, in any way any form of guarantee on the final performance of the cycle itself.