4608M06114 - 1K HIGHTERM SOFT TOUCH V2

PREPARATION OF THE SUBSTRATE:

The substrate should be free of any kind of surface contaminants, (lubricant, traces of oxidation, residues of waxes or polishing pastes, residues of substances from galvanic baths, etc.) so it should be treated with appropriate cleaning methods, then apply a first coat of paint 22L00501.

PREPARATION OF THE PRODUCT:

Spray application with mixed air guns Comp. A : 4608M06114 100 parts by weight Diluent : 252 30 parts by weight Electrostatic gun spray application (ESTA) Comp. A : 4608M06114 100 parts by weight Diluent : TH05840 40-50 parts by weight

PRODUCT SPECIFICATIONS:

TYPE OF PRODUCT

Single-component.

APPEARANCE OF THE FILM

Matte.

COLORS

Clear

SPECIFIC WEIGHT

1,00 kg/lt (± 0,02)

SUPPLY VISCOSITY

80” (±5)

DRY RESIDUE (A)

50% (±2)

DRYING

Drying 5-10’ at 20 °C Forced Drying 30-45’ at 160 °C

RECOMMENDED LAYERS

A cross coat

SAFETY REGULATIONS:

Strictly follow the instructions on the labeling and in the safety data sheet.

STORAGE CONDITIONS:

Always close containers carefully after use. The storage room should be dry, not exposed to the sun and with a temperature between +10 °C and +30 °C. Rev.: 06/22 The data and information contained in this sheet are the result of our experience and accurate laboratory tests. However, since the painting process represents a set of operations that are beyond our control, they do not therefore guarantee, in any way, the final performance of the cycle.

The data and information contained in this sheet are the result of our experience and accurate tests and laboratory tests.
However, since the painting process is a set of operations that are beyond our control, they therefore do not constitute, in any way any form of guarantee on the final performance of the cycle itself.