64050 - BASE MONOCOMPONENTE TRASPARENTE

FIELD OF APPLICATION:

Single-component Transparent paint to be used with our P-series and TP-series pastes for making a wide variety of colors. Varnish 64050 has excellent elasticity and great adhesion on ABS and the plastics most commonly used in eyewear (cellulose acetate, cellulose acetopropionate, Grilamid). Being a primer paint, it needs a suitable top coat (Gloss or Matte).

PREPARATION OF THE SUBSTRATE:

Plastic materials: cleaning and/or tumbling.

PREPARATION OF THE PRODUCT:

With P./TP series pastel pastes. Maximum addition: 25% For additions greater than 25%, preliminary tests of adherence to the substrate and sealing of the gloss or matte finish on the single-component primer are recommended. With Aluminum, Pearl, iridescent pastes P.7xx and P.8xx series Maximum addition: 10% For additions greater than 10%, preliminary tests of adherence to the substrate and sealing of the gloss or matte finish on the single-component primer are recommended. With Coloring Concentrates Series 50100 Maximum addition: 20% For additions greater than 25%, preliminary tests of adherence to the substrate and sealing of the gloss or matte finish on the single-component primer. Dilution: 70-100% with 10002AE or with 10001AB.

PRODUCT SPECIFICATIONS:

TYPE OF PRODUCT

Single-component.

COLORS

Clear

SPECIFIC WEIGHT

0,950 kg/lt (± 0,02)

SUPPLY VISCOSITY

47” (±3) ASTM 4 at 25 °C

DRY RESIDUE

23% (±2)

DRYING

Curing - Print-free: 4-5 hours. 10’ - 15’ at 20 °C - Print-free: 4-5 hours. 5’ - 10’ at 40 - 50 °C

RECOMMENDED LAYERS

2 coats. NOTE: OPM001 always requires overcoating.

SAFETY REGULATIONS:

Strictly follow the instructions on the labeling and in the safety data sheet.

STORAGE CONDITIONS:

In unopened and sealed packages, not exposed to the sun and kept at a temperature of +5 to +30 °C. Rev.: 06/22 The data and information contained in this sheet are the result of our experience and accurate laboratory tests. However, since the painting process represents a set of operations that are beyond our control, they do not therefore guarantee, in any way, the final performance of the cycle.

The data and information contained in this sheet are the result of our experience and accurate tests and laboratory tests.
However, since the painting process is a set of operations that are beyond our control, they therefore do not constitute, in any way any form of guarantee on the final performance of the cycle itself.